|
Category
Brands
Min Price MaxPrice Today's
|
Steering Components
Catrike Headset Sealed Bearing $15.00 TH INDUSTRIES 1" ACB 36x45 degrees 373# - (More Details) IN STOCK 
UTCustom Ackerman Compensators for CXS Suspension $60.00 The suspension on the Sunseeker Fat Tad CXS is simple and effective, but has a major flaw. The tierod is connected to the bottom of the spindle which means the alignment changes as the suspension moves. Our Ackerman Compensators move the tierod to the bottom of the headtube so the alignment is no longer affected by suspension movement. You will need to replace or shorten your tierod to use these. Combine with our headsets for a much improved trike. - (More Details)
UTCustom Revolution EC34/30 Headset for Sunseeker Trikes (each) $25.00 UTCustom headset is compatible with Sun Spindles and is a great alternative to the stock headsets on the CXS and other Sun trikes. - (More Details) IN STOCK 
RST Capa 20in Suspension Fork, 1-1/8in Steerer Tube, 50mm Travel $85.00 Coil sprung and has an adjustable top cap that lets a rider adjust the pre-load of the spring depending on rider weight and desired feel. 25.4mm stanchions and an alloy lower. IN STOCK 
SR Suntour XCT JR-L 20 Suspension Fork - 20in, 1-1/8in Threadless Steerer, 63mm Travel, Disc, Black $85.00 A suspension fork that offers a coil spring with preload adjustment, cast aluminum lowers and 28mm nickel plated stanchions. Intended for casual off-road use. IN STOCK 522mm Steering Linkage - Tierod (rod ends not included) - FOR ECO TAD / EZ TAD / T3CX $49.99 SunSeeker Eco Tad, EZ Tad, T3CX Replacement Steering Link IN STOCK 
Sunlite Fork 20in Recumbent Chromoly 250x155x25.4x30.0 V-brake/Disc
- Chromoly construction IN STOCK 
HP Velotechnik DV22 Rear Shock Spring - 450lbs $19.00 Rear Shock Replacement Springs for your HP Velotechnik. Fits the DNM-DV22 shock. IN STOCK 
Catrike Headset Assembly Complete $100.00 Complete Catrike Headset. IN STOCK 
HP Velotechnik DV22 Rear Shock Spring - 550lbs $19.00 Rear Shock Replacement Springs for your HP Velotechnik. Fits the DNM-DV22 shock. IN STOCK 
HP Velotechnik Anti-Roll Bar - HARD $59.00 Make your trike's front suspension softer or harder, depending on your weight and load capacity. the anti-roll bar, which comes in white (soft) or grey (hard), works in conjunction with the Front Springs, which come in red (soft) or yellow (hard). IN STOCK 550mm Steering Linkage - Tierod (rod ends not included) $59.99 Steering linkage used on CXS Fat Tad Trikes. P/N: 670246 IN STOCK 
HP Velotechnik Anti-Roll Bar - SOFT $59.00 Make your trike's front suspension softer or harder, depending on your weight and load capacity. the anti-roll bar, which comes in white (soft) or grey (hard), works in conjunction with the Front Springs, which come in red (soft) or yellow (hard). IN STOCK 
ICE Heim Joint Cover (Boot for Rose Joint) $3.07 A rubber cover for ICE track-rod Heim joints. A rose by any other name would still cover your ICE tie (track) rod end.a.k.a Rose joint boot.
Catrike Tie Rod Assembly for 559 - Medium $75.00 This OEM tie rod has the correct spacers for your Catrike 559. - (More Details) IN STOCK CXS Replacement Tie Rod - Bolts Not Included $59.99 Length - 550mm IN STOCK Steering assembly for AZUB Trikes $37.00 INCLUDES : IN STOCK 
HP Velotechnik Spacer 1inch Black 2 mm $4.00 These are between the top dust cap, one on bottom one on top. You will need two! Manufacturer part # SPACER - (More Details)
|
UtahTrikes.com is a wholly owned subsidiary of Guy Graphics, Inc.
Copyright © 2006-2024 All Rights Reserved.
Materials on this site may not be used without express written permission.