Search Catalog Category Chainrings (4) Rear Derailleur (3) Brands Wolf Tooth Components (7) Min Price GO MaxPrice GO Today's Top Products SunSeeker Fat Tad CXS Full Suspension Tadpole Recumbent Trike Catrike Expedition Recumbent Trike SunSeeker Eco Tad SX Tadpole Recumbent Trike Catrike Dumont Full Suspension Folding Trike

Wolf Tooth Components We are a group of hardcore cyclists that found ourselves spending a lot of time talking about bike components. Like most racers we were always looking for new products that could make our bikes lighter, faster, or more reliable. Since we all come from engineering and manufacturing backgrounds our conversations often focused on how we could make the products on the market today even better. The company was founded to design and manufacture unique cycling components that emphasize function, performance, and reliability to meet the needs of fellow racers and riders. Wolf Tooth 42T GC Cog for SRAM 11-36 10-Speed Cassettes Black $79.99 Wolf Tooth Shimano GCs replace a cog on compatible SRAM 10-speed cassettes in order to provide extra low range for your 1x drivetrain. -Compatible only with the following SRAM 11-36 and 12-36 cassettes: PG-1030, 1050, 1070 and the XG-1080 -Remove the 14T cog on the XG-1080 instead of the 17T -SRAM GC42s are not compatible with 2011 or older SRAM rear derailleurs -Compatible only with the following SRAM 10 Speed Cassettes: X5 11-36T (PG-1030), X7 11-36T (PG-1050), X9 11-36T (PG-1070), X0 11-36t(XG - 1080) - Remove the 14t rather than the 17t -Per Wolf Tooth, the GC 42 is not compatible with 2011 or older SRAM rear derailleurs due to the position of the upper jockey wheel. The best ways to tell the vintages of your rear derailleur is 1) If you have a type 2 (clutch type) rear derailleur it is 2012 or newer and 2) the upper jockey wheel on 2012 and newer rear derailleurs are offset from the derailleur cage's axis of rotation.Wolf Tooth does not recommend using the GC 42 if you have a pre-2011 SRAM 10-speed mountain derailleur - (More Details) Wolf Tooth 16T Cog for use with Shimano or SRAM GC Cogs $14.99 Having trouble finding the right gear? Utilize this 16 tooth cog in conjunction with a Wolf Tooth GC for smoother shifting transitions on an 11-36 10 speed cassette. -Compatible with Wolf Tooth GC Cogs -Transitions when removing the 15T & 17T Cog: 11-13-16-19 -1.6mm thick - (More Details) Wolf Tooth RoadLink - for Shimano Wide Range Road Configuration $21.99 The RoadLink is a simple device that offsets the position of your Shimano road derailleur to make it possible to run a wide-range mountain bike style cassette. It is an ideal solution for riders looking to convert their road, gravel, cyclocross, or commuter. -The RoadLink is optimized for use with ten or eleven-speed 11-36t and 11-40t cassettes -11-42 or 10-42 setups are not supported -Works with all 10-11 speed Shimano and SRAM Road Derailleurs -Best used with Single or Double Setups - see manufacturer's site for more details - (More Details) IN STOCK Wolf Tooth 30T 104 BCD Chainring 4-Bolt Drop-Stop Red $64.99 Featuring the proprietary mud clearing Drop-Stop tooth design, these rings are designed to fit any 104 BCD crankset. Made in Minneapolis, MN with exceptional chain retention in mind, these chainrings are best paired with a clutch-style rear derailleur. -Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains -Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains -Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings -If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention -Use of a clutch-style rear derailleur is recommended -Made from 7075-T6 aluminum for long life - (More Details) IN STOCK Wolf Tooth 30T 104 BCD Chainring 4-Bolt Drop-Stop Black $64.99 Featuring the proprietary mud clearing Drop-Stop tooth design, these rings are designed to fit any 104 BCD crankset. Made in Minneapolis, MN with exceptional chain retention in mind, these chainrings are best paired with a clutch-style rear derailleur. -Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains -Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains -Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings -If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention -Use of a clutch-style rear derailleur is recommended -Made from 7075-T6 aluminum for long life - (More Details) IN STOCK Wolf Tooth 25mm B-Screw $3.40 For adapting old derailleurs when using a GC Cog Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further. -M4 x 24mm screw for that extra little push - (More Details) IN STOCK Wolf Tooth 1x6mm Chainring Bolt - Gold Set of 5 Dual Hex Fittings $29.99 These 6mm long bolts are designed for singlespeed usage and use a double hex head interface so you don't have to use a chainring nut spanner. -6mm length -Made in the US out of 7075 Aluminum Alloy -Has hex heads on both the bolt and nut for easy installation -Max torque of 6-7 Nm with light grease on threads only - (More Details) IN STOCK Wolf Tooth 104 BCD Chainring - 32t, 104 BCD, 4-Bolt, Drop-Stop B, Black $49.99 Featuring the proprietary mud clearing Drop-Stop tooth design, these rings are designed to fit any 104 BCD crankset. Made in Minneapolis, MN with exceptional chain retention in mind, these chainrings are best paired with a clutch-style rear derailleur. Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Use of a clutch-style rear derailleur is recommended Made from 7075-T6 aluminum for long life - (More Details) Wolf Tooth Lindarets GoatLink Shimano Direct Mount Rear Derailleur Adaptor $24.95 Goatlinks are designed to optimize the derailleur's position relative to your cassette. Offered in two versions - a 10-speed and 11-speed, each is intended to improve the shifting of your 1x drivetrain. - Improves chain wrap and reduces premature shifting degradation by replacing the Direct Mount link from compatible Shimano ten-speed rear derailleurs - Compatible with 2013 or later Shimano 10-speed Shadow Plus rear derailleurs that use the 8mm Direct Mount intermediate link whose link is 7.9 - 8.1mm thick - Does not work with direct mount native frames or SRAM rear derailleurs - The fastest route to improved wear and long-term shifting performance on wide-range 1x10 drivetrains that utilize Shimano Shadow Plus derailleurs - Stainless Steel mounting hardware included - 8-10NM tightening torque - (More Details) IN STOCK Results 1 - 9 of 9 Go to Page: 1

UtahTrikes.com is a wholly owned subsidiary of Guy Graphics, Inc.
Copyright © 2006-2024 All Rights Reserved.
Materials on this site may not be used without express written permission.