View some recent custom trike builds
of the UTCustom Catrike Cat-4 Recumbent Quad:
|
Get your own custom UTCustom Catrike Cat-4 Recumbent Quad This Catrike Cat-4 Quad features the Nuvinci N360 transmission and the Patterson 2-speed crankset. This Quad is based on the Catrike Villager frame. With a higher seat and a wider width this is the perfect go-anywhere cycle.
The Quad conversion is made right here in Utah by Utah Trikes. This Quad features the Nuvinci N360 transmission. We use a custom chain tensioner so it can be used with a front triple crankset and provide for the adjustable boom.
This Cat-4 Quad sports four Avid BB7 disc brakes. The Avid BB7 calipers are extremely adjustable. There is a red knob on each side which adjusts the brake pads. The Cat-4 Quad comes with the Samagaga geared differential. The Quad uses a 17mm hardened steel axle. We use the OEM Catrike hubs on the rear to match the front.
The Patterson drive is a two-speed transmission with the equivalent gearing of a 28T and 45T chainring. The Patterson drive is a two-speed transmission with the equivalent gearing of a 28T and 45T chainring.
The Villager Quad easily gets into race mode by laying the seat down. Now the Quad is ready for cruising with the seat leaned forward. Now the Quad is ready for cruising with the seat leaned forward.
Check out our catalog for more options on how you can customize your trike |
UtahTrikes.com is a wholly owned subsidiary of Guy Graphics, Inc.
Copyright © 2006-2024 All Rights Reserved.
Materials on this site may not be used without express written permission.