Designed to accurately indicate when a chain reaches .5% and .75% which most chain manufactures recommend replacement. Chain wear indicator is a simple go or no go tool.
-Updated to be longer, more accurate and features permanent measurement markings -Accurately indicates when a chain reaches 0.5% and 0.75%, the points at which most chain manufacturers suggest replacement
A worn chain shifts poorly and wears sprockets at an accelerated rate. The CC-3 is a "Go, No-Go" gauge designed to accurately indicate when a chain reaches 0.75% and 1% wear, the point at which most chain manufacturers suggest replacement. If the 0.75% side fits into the chain, the chain is worn to 3/4 of 1%. The chain should be replaced soon. If the 1% side fits into the chain, the chain is worn out and should be replaced. Made from precision, laser cut steel. Fits all chain of 1/2-inch pitch, including 10-speed chains.
UtahTrikes.com is a wholly owned subsidiary of Guy Graphics, Inc.
2024 All Rights Reserved.
Materials on this site may not be used without express written permission.
